Next Up Previous Hi Index

Chapter 11

Files and exceptions

While a program is running, its data is in memory. When the program ends, or the computer shuts down, data in memory disappears. To store data permanently, you have to put it in a file. Files are usually stored on a hard drive, floppy drive, or CD-ROM.

When there are a large number of files, they are often organized into directories (also called "folders"). Each file is identified by a unique name, or a combination of a file name and a directory name.

By reading and writing files, programs can exchange information with each other and generate printable formats like PDF.

Working with files is a lot like working with books. To use a book, you have to open it. When you're done, you have to close it. While the book is open, you can either write in it or read from it. In either case, you know where you are in the book. Most of the time, you read the whole book in its natural order, but you can also skip around.

All of this applies to files as well. To open a file, you specify its name and indicate whether you want to read or write.

Opening a file creates a file object. In this example, we the variable f refers to the new file object.

>>> f = open("test.dat","w")
>>> print f
<open file 'test.dat', mode 'w' at fe820>

The open function takes two arguments. The first is the name of the file, and the second is the mode. Mode "w" means that we are opening the file for writing.

If there is no file named test.dat, it will be created. If there already is one, it will be replaced by the file we are writing.

When we print the file object, we see the name of the file, the mode, and the location of the object.

To put data in the file we invoke the write method on the file object:

>>> f.write("Now is the time")
>>> f.write("to close the file")

Closing the file tells the system that we are done writing and makes the file available for reading:

>>> f.close()

Now we can open the file again, this time for reading, and read the contents into a string. This time, the mode argument is "r" for reading:

>>> f = open("test.dat","r")

If we try to open a file that doesn't exist, we get an error:

>>> f = open("test.cat","r")
IOError: [Errno 2] No such file or directory: 'test.cat'

Not surprisingly, the read method reads data from the file. With no arguments, it reads the entire contents of the file:

>>> text = f.read()
>>> print text
Now is the timeto close the file

There is no space between "time" and "to" because we did not write a space between the strings.

read can also take an argument that indicates how many characters to read:

>>> f = open("test.dat","r")
>>> print f.read(5)
Now i

If not enough characters are left in the file, read returns the remaining characters. When we get to the end of the file, read returns the empty string:

>>> print f.read(1000006)
s the timeto close the file
>>> print f.read()

>>>

The following function copies a file, reading and writing up to fifty characters at a time. The first argument is the name of the original file; the second is the name of the new file:

def copyFile(oldFile, newFile):
  f1 = open(oldFile, "r")
  f2 = open(newFile, "w")
  while 1:
    text = f1.read(50)
    if text == "":
      break
    f2.write(text)
  f1.close()
  f2.close()
  return

The break statement is new. Executing it breaks out of the loop; the flow of execution moves to the first statement after the loop.

In this example, the while loop is infinite because the value 1 is always true. The only way to get out of the loop is the execute break, which happens when text is the empty string, which happens when we get to the end of the file.

11.1 Text files

A text file is a file that contains printable characters and whitespace, organized into lines separated by newline characters. Since Python is specifically designed to process text files, it provides methods that make the job easy.

To demonstrate, we'll create a text file with three lines of text separated by newlines:

>>> f = open("test.dat","w")
>>> f.write("line one\nline two\nline three\n")
>>> f.close()

The readline method reads all the characters up to and including the next newline character:

>>> f = open("test.dat","r")
>>> print f.readline()
line one

>>>

readlines returns all of the remaining lines as a list of strings:

>>> print f.readlines()
['line two\012', 'line three\012']

In this case, the output is in list format, which means that the strings appear with quotation marks and the newline character appears as the escape sequence <br>012.

At the end of the file, readline returns the empty string and readlines returns the empty list:

>>> print f.readline()

>>> print f.readlines()
[]

The following is an example of a line-processing program. filterFile makes a copy of oldFile, omitting any lines that begin with #:

def filterFile(oldFile, newFile):
  f1 = open(oldFile, "r")
  f2 = open(newFile, "w")
  while 1:
    text = f1.readline()
    if text == "":
      break
    if
text[0] == '#':
      continue
    f2.write(text)
  f1.close()
  f2.close()
  return

The continue statement ends the current iteration of the loop, but continues looping. The flow of execution moves to the top of the loop, checks the condition, and proceeds accordingly.

Thus, if text is the empty string, the loop exits. If the first character of text is a hash mark, the flow of execution goes to the top of the loop. Only if both conditions fail do we copy text into the new file.

11.2 Writing variables

The argument of write has to be a string, so if we want to put other values in a file, we have to convert them to strings first. The easiest way to do that is with the str function:

>>> x = 52
>>> f.write (str(x))

An alternative is to use the format operator %. When applied to integers, % is the modulus operator. But when the first operand is a string, % is the format operator.

The first operand is the format string, and the second operand is a tuple of expressions. The result is a string that contains the values of the expressions, formatted according to the format string.

As a simple example, the format sequence "%d" means that the first expression in the tuple should be formatted as an integer. Here the letter d stands for "decimal":

>>> cars = 52
>>> "%d" % cars
'52'

The result is the string '52', which is not to be confused with the integer value 52.

A format sequence can appear anywhere in the format string, so we can embed a value in a sentence:

>>> cars = 52
>>> "In July we sold %d cars." % cars
'In July we sold 52 cars.'

The format sequence "%f" formats the next item in the tuple as a floating-point number, and "%s" formats the next item as a string:

>>> "In %d days we made %f million %s." % (34,6.1,'dollars')
'In 34 days we made 6.100000 million dollars.'

By default, the floating-point format prints six decimal places.

The number of expressions in the tuple has to match the number of format sequences in the string. Also, the types of the expressions have to match the format sequences:

>>> "%d %d %d" % (1,2)
TypeError: not enough arguments for format string
>>> "%d" % 'dollars'
TypeError: illegal argument type for built-in operation

In the first example, there aren't enough expressions; in the second, the expression is the wrong type.

For more control over the format of numbers, we can specify the number of digits as part of the format sequence:

>>> "%6d" % 62
'    62'
>>> "%12f" % 6.1
'    6.100000'

The number after the percent sign is the minimum number of spaces the number will take up. If the value provided takes fewer digits, leading spaces are added. If the number of spaces is negative, trailing spaces are added:

>>> "%-6d" % 62
'62    '

For floating-point numbers, we can also specify the number of digits after the decimal point:

>>> "%12.2f" % 6.1
'        6.10'

In this example, the result takes up twelve spaces and includes two digits after the decimal. This format is useful for printing dollar amounts with the decimal points aligned.

For example, imagine a dictionary that contains student names as keys and hourly wages as values. Here is a function that prints the contents of the dictionary as a formatted report:

def report (wages) :
  students = wages.keys()
  students.sort()
  for student in students :
    print "%-20s %12.02f" % (student, wages[student])

To test this the function, we'll create a small dictionary and print the contents:

>>> wages = {'mary': 6.23, 'joe': 5.45, 'joshua': 4.25}
>>> report (wages)
joe                          5.45
joshua                       4.25
mary                         6.23

By controlling the width of each value, we guarantee that the columns will line up, as long as the names contain fewer than twenty-one characters and the wages are less than one billion dollars an hour.

11.3 Directories

When you create a new file by opening it and writing, the new file goes in the current directory (wherever you were when you ran the program). Similarly, when you open a file for reading, Python looks for it in the current directory.

If you want to open a file somewhere else, you have to specify the path to the file, which is the name of the directory (or folder) where the file is located:

>>>   f = open("/usr/share/dict/words","r")
>>>   print f.readline()
Aarhus

This example opens a file named words that resides in a directory named dict, which resides in share, which resides in usr, which resides in the top-level directory of the system, called /.

You cannot use / as part of a filename; it is reserved as a delimiter between directory and filenames.

The file /usr/share/dict/words contains a list of words in alphabetical order, of which the first is the name of a Danish university.

11.4 Pickling

In order to put values into a file, you have to convert them to strings. You have already seen how to do that with str:

>>> f.write (str(12.3))
>>> f.write (str([1,2,3]))

The problem is that when you read the value back, you get a string. The original type information has been lost. In fact, you can't even tell where one value ends and the next begins:

>>>   f.readline()
'12.3[1, 2, 3]'

The solution is pickling, so called because it "preserves" data structures. The pickle module contains the necessary commands. To use it, import pickle and then open the file in the usual way:

>>> import pickle
>>> f = open("test.pck","w")

To store a data structure, use the dump method and then close the file in the usual way:

>>> pickle.dump(12.3, f)
>>> pickle.dump([1,2,3], f)
>>> f.close()

Then we can open the file for reading and load the data structures we dumped:

>>> f = open("test.pck","r")
>>> x = pickle.load(f)
>>> x
12.3
>>> type(x)
<type 'float'>
>>> y = pickle.load(f)
>>> y
[1, 2, 3]
>>> type(y)
<type 'list'>

Each time we invoke load, we get a single value from the file, complete with its original type.

11.5 Exceptions

Whenever a runtime error occurs, it creates an exception. Usually, the program stops and Python prints an error message.

For example, dividing by zero creates an exception:

>>> print 55/0
ZeroDivisionError: integer division or modulo

So does accessing a nonexistent list item:

>>> a = []
>>> print a[5]
IndexError: list index out of range

Or accessing a key that isn't in the dictionary:

>>> b = {}
>>> print b['what']
KeyError: what

In each case, the error message has two parts: the type of error before the colon, and specifics about the error after the colon. Normally Python also prints a traceback of where the program was, but we have omitted that from the examples.

Sometimes we want to execute an operation that could cause an exception, but we don't want the program to stop. We can handle the exception using the try and except statements.

For example, we might prompt the user for the name of a file and then try to open it. If the file doesn't exist, we don't want the program to crash; we want to handle the exception:

filename = raw_input('Enter a file name: ')
try:
  f = open (filename, "r")
except:
  print 'There is no file named', filename

The try statement executes the statements in the first block. If no exceptions occur, it ignores the except statement. If any exception occurs, it executes the statements in the except branch and then continues.

We can encapsulate this capability in a function: exists takes a filename and returns true if the file exists, false if it doesn't:

def exists(filename):
  try:
    f = open(filename)
    f.close()
    return 1
  except:
    return 0

You can use multiple except blocks to handle different kinds of exceptions. The Python Reference Manual has the details.

If your program detects an error condition, you can make it raise an exception. Here is an example that gets input from the user and checks for the value 17. Assuming that 17 is not valid input for some reason, we raise an exception.

def inputNumber () :
  x = input ('Pick a number: ')
  if x == 17 :
    raise 'BadNumberError', '17 is a bad number'
  return x

The raise statement takes two arguments: the exception type and specific information about the error. BadNumberError is a new kind of exception we invented for this application.

If the function that called inputNumber handles the error, then the program can continue; otherwise, Python prints the error message and exits:

>>> inputNumber ()
Pick a number: 17
BadNumberError: 17 is a bad number

The error message includes the exception type and the additional information you provided.

As an exercise, write a function that uses inputNumber to input a number from the keyboard and that handles the BadNumberError exception.

11.6 Glossary

file
A named entity, usually stored on a hard drive, floppy disk, or CD-ROM, that contains a stream of characters.
directory
A named collection of files, also called a folder.
path
A sequence of directory names that specifies the exact location of a file.
text file
A file that contains printable characters organized into lines separated by newline characters.
break statement
A statement that causes the flow of execution to exit a loop.
continue statement
A statement that causes the current iteration of a loop to end. The flow of execution goes to the top of the loop, evaluates the condition, and proceeds accordingly.
format operator
The % operator takes a format string and a tuple of expressions and yields a string that includes the expressions, formatted according to the format string.
format string
A string that contains printable characters and format sequences that indicate how to format values.
format sequence
A sequence of characters beginning with % that indicates how to format a value.
pickle
To write a data value in a file along with its type information so that it can be reconstituted later.
exception
An error that occurs at runtime.
handle
To prevent an exception from terminating a program using the try and except statements.
raise
To signal an exception using the raise statement.


Next Up Previous Hi Index